ViscoQC™ 100 Rotational Viscometer

ViscoQC™ 100 - Model R Rotational Viscometer

ViscoQC™ 100 is Anton Paar’s entry-level rotational viscometer that measures the dynamic viscosity as a single-point value. Unbeatable ease of use is guaranteed with its intuitive user interface, unique TruMode (Auto Mode), automatic spindle detection, automatic guard detection, magnetic spindle coupling for one-hand operation, and many more features

Available in three different torque ranges -

L: For low-viscosity samples (solvents, oils, juices, …) -

R: For regular (medium-viscosity) samples (paints, adhesives, dairy products, …) -

H: For high-viscosity samples (mayonnaise, peanut butter, ointments, …)

Viscosity range [mPa.s] (depends on the measuring system) 1* to 6 000 000 (Model L), 10* to 40 000 000 (Model R),  60* to 320 000 000 (Model H)

Speed [rpm] 0.1 to 200 25 increments: 19 preset plus 6 editable 
Accuracy  ±1.0 % full scale range

More details
Pensky Martens Flash Point Tester PMA 5

Pensky Martens Flash Point Tester PMA 5 


Application range up to 405 °C (°C/°F selectable)
Ignition Gas and electric (interchangeable)
 Heating According to method or user-defined
 Stirring According to method or user-defined
Cooling Built-in forced air (fan)
Flash point detection Thermocouple
Sample temperature Pt100 stainless steel probe
Sample temperature calibration Dynamic calibration against certified ASTM thermometer and 
offset capability with correction table (21 calibration points)
Barometric pressure correction Automatic correction
Safety Overheat protection, automatic shut-off, fire-extinguishing system, password
Interfaces 3x USB, 1x RS232, 1x LAN
Gas supply Test flame: 50 mbar of propane or butane
Power supply Fire extinguisher: 6 bar to 12 bar of nitrogen 
                            or carbon dioxide
115 V/230 V, 50 Hz/60 Hz, 1000 W
Dimensions 230 mm x 410 mm x 460 mm (W x D x H)
Weight 14 kg

More details
Multiwave GO 50Hz

Multiwave GO is a microwave digestion system, optimized for economic routine analysis of environmental samples, food quality control, plant material and other biological material. A single magnetron delivers up to 850 W microwave power in an unpulsed mode over the full power range. The sophisticated software prevents thermal overshoots and the design of the microwave applicator provides utmost field density, allowing efficient and uniform heating across all vessel positions.

Comes with: Mains cable with plug CEE Type 7 (Central European), 3 m exhaust hose, basic tools and instruction manual. 
Included basic tools: 1# Hose Clip Dmin=57 Dmax=73 (89281), 2# Interface cap USB (105496), 1# Rotor 12HVT50 (133015, incl. 12 pressure vessels),1# Handling Tool for HVT (103438), 5# Rotor lid seal (131162), 1# IR calibrator for Multiwave GO (131034), 5# IR sensor foil, 1# USB flash drive 4GB Power supply: 230 V, 50 Hz, 2680 VA
Manufactured by Anton Paar GmbH

More details


Accuracy: 0.00005 g/cm3

For the determination of density and density-related values of liquids and gases based on Anton Paar's U-tube technology. Includes patent registered state-of-the-art technologies exclusively available from Anton Paar: ThermoBalance™ for fast temperature changes without readjustments. FillingCheck™ and U-View™ for error-free measurements. Automatic and rapid full-range viscosity correction. Modular system for easy expansion, e.g. to include automatic sample filling units. For detailed information please refer to Anton Paar product documentation, or contact Anton Paar GmbH

Measuring range:
Density: 0 to 3 g/cm3
Temperature: 0 to 95 °C (0 to 203 °F)
Pressure range: 0 to 10 bar (0 to 145 psi)
Accuracy: 0.00005 g/cm3

Included Accessories

1 # Accessories kit:
2 m hose 3 x 5 mm silicone
7 # syringe 2 ml Luer
2 # injection adapter Luer
2 # male Luer plug
3 # adapter Luer cone
1 # Phillips screwdriver PH-0x40
2 # Protection foils for touch screen
1 # instruction manual
1 # waste vessel 500 ml
1 # density standard. "ultra pure water" 5x10ml with certificate

More details
SVM™ 3001 Stabinger Viscometer™

The SVM™ 3001 Stabinger Viscometer™ is
optimized for fast heating and cooling over a
wide temperature range.
It measures the dynamic viscosity according
to ASTM D7042 and density according to
ASTM D4052. From these result, the
viscometer automatically calculates the
kinematic viscosity and delivers measurement
results which are equivalent to ISO 3104 or
ASTM D445. SVM™ 3001 is designed
for measuring liquid, mainly oily samples.

Manufactured by Anton Paar GmbH, Austria

More details
DMA™ 35 Portable Density Meter Version 4

DMA™ 35 is your portable digital meter for determining density, specific gravity, and concentration. It employs the oscillating U-tube principle
Technical specifications
Measuring range
Density: 0 g/cm³ to 3 g/cm³
Temperature: 0 °C to 40 °C  (32 °F to 104 °F)*
Viscosity: 0 mPa·s to 1000 mPa·s
Density: 0.001 g/cm³
Temperature: 0.2 °C (0.4 °F)
Repeatability, s.d.
Density: 0.0005 g/cm3
Temperature: 0.1 °C (0.2 °F)
Density: 0.0001 g/cm3
Temperature: 0.1 °C (0.1 °F)
Ambient temperature***
-10 °C to +50 °C (14 °F to 122 °F)
Output parameters
Density, density at reference temperature, specific gravity, alcohol concentration, sugar/extract concentration, °Baumé, API functions for product groups A, B, and D for reference temperatures of 15 °C, 20 °C, 29.5 °C, and 60 °F, H2SO4 concentration, ten programmable custom-specific measuring units
Sample volume 2 mL
Dimensions  (L x W x H)
245 mm x 103 mm x 126 mm (9.6 in x 4 in x 5 in)
Internal storage
1024 measured results, 250 sample IDs,  30 measuring methods
Power supply Three 1.5 V LR06 AA alkaline batteries
Weight 660 g (23.3 ounces)
Interfaces Bluetooth®, RFID

More details
Abbemat 3000 Compact Digital Refractometer

 Abbemat 3000 Compact Digital Refractometer

Quality control of  food oils

Concentration measurement of binary solutions, e.g. acids, bases and salt
Dry substance of sugar beet and sugar cane
Quality control of milk products
Quality control of petroleum products e.g. viscous oils, fuels and hydrocarbon liquids

Range nD 1.30to 1.66
Resolution nD ± 0.0001
Measuring principle  Critical angle of total reflection measurement by shadowline detection with CCD array
Brix Range  0 to 100 %
Sample/prism temperature control by built-in solid state thermostat (Peltier)
Temperature Automatic temperature correction
Temperature probe accuracy1) ± 0.05 °C
Prism Synthetic sapphire
Sample well  Stainless steel
Light source  LED light source, average lifetime > 100 000 h
Wavelength 589 nm (by wavelength- adjusted inter ference filter)
Display 5.8" color touchscreen

More details

MCP 100 Modular Circular Compact Polarimeter, Anton Paar Optotec, Germany

for determination of optical rotation, specific rotation, concentration and international sugar scales (ISS) of samples with an Optical Density (OD) up to 2.0 at 589 nm. With modular design for specific configurations and future upgrades, high accuracy over the entire measuring range, automatic identification of the sample cell and quartz control plate, Toolmaster™

Measuring Performance

Measuring method:                  Circular polarimeter

Measuring scales:                   Optical Rotation, Specific Rotation, %Concentration

Temperature reading:               Temperature input for sample cell and quartz control plate equipped with temperature sensors Pt 100

Special features:                      -ToolmasterÔ - Automatic identification of the sample cell to prevent incorrect sample cell selection and ensure easy system configuration.

 -Peltier element for automatic temperature control in a range  20 °C and 25 °C.

Measuring range:                      ± 89.9°

Accuracy Optical Rotation:       ± 0.01°


Temperature range of                20 °C and 25 °C Peltier element:             

Temperature accuracy:              ±0.2 °C *

Repeatability in  Optical Rotation:        ± 0.01° 

More details
Rapidoxy 100 Oxidation Stability Tester

Rapidoxy 100 Oxidation Stability Tester

RapidOxy 100 artificially accelerates the oxidation process of fluid, solid, and semi-solid samples by using increased temperature and an excess of pure oxygen. The measuring principle is based on ASTM D7525, ASTM D7545, and IP 595. The testing takes place in a closed system and the pressure is accurately monitored, leading to a high precision of the test results. With its high temperature range of up to 180 °C RapidOxy 100 guarantees very short test times and delivers results in a fraction of the time compared to other accelerated aging methods.

You can start a test immediately by placing a very small sample amount of usually only 5 mL or 4 g into a glass dish, without any sample preparation. Put the dish into the stainless steel test chamber. Close the cover. The intuitive software guides you through the test run. Automatic safety locking is applied


Application range
Up to 180 °C
Pressure range Up to 1800 kPa
Oxygen supply 800 kPa (maximum input)
Sample volume Typically 5 mL or 4 g
Dimensions 20 cm x 40 cm
Weight <9 kg

More details

MCR 72 is equipped with a ball-bearing motor and provides measurements in rotational mode and for special applications also in the oscillatory mode. There is a range of accessories available. The step-by-step software and special features like TruRay (integrated light), QuickConnect (fast and easy mounting of the measuring system), Toolmaster™ (automatic tool recognition and configuration), etc. guarantee excellent ease of use. MCR 72 hasa motor which lifts up the measuring head automatically to set an exact measuring gap. This gap is 100 % reproducible. MCR 72  can be equipped with temperature devices to cover a range from -40 °C up to 400 °C. 

TruRay, the lighting of the measuring surface that can be gradually regulated for a clear view of your sample. When changing between measuring systems, QuickConnect allows one-hand connection of the measuring systems and ensures fast, convenient system changes without the use of a screwing mechanism. After this, ToolmasterTM takes over by automatically recognizing the mounted tool and temperature units. Finally the SafeGap feature ensures that the setting of the measuring gap is always identical for every measurement and exactly reproducible every time.

More details